Borg & Overstrom B3.2 Floorstanding Water Dispenser

The b3 provides maximum water hygiene by using a direct chill cooling system. It also boasts all the features and options of the b4 with additional user benefits including a generously sized auto-lit dispensing area, integral cup dispenser, and touch panel controls.

This is a Direct Chill mains-fed dispenser, plumbed directly into your mains water supply, saving storage space for bottles. The b3 water dispenser has been upgraded to allow bottles and jugs to be placed under the dispensing head height now 265mm. enough to fill 500ml bottles, cups, and water jugs.

The b3 also has a built-in cup dispenser, the lower half of the cooler provides storage for cups and filters. The Direct Chill configuration allows for greater hygiene control.

Power Requirements - Hertz 50/Volts 220-240
Chilled temperature - Min 2°C/Max 11°C
Hot temperature - Max 92°C
Throughput litres per hour - Chilled & Sparkling 30/Hot 6
Floor Standing - Chilled & Ambient - W325xD380xH1065mm
Water Systems - Direct Chill
Dispense Height - 265mm
Max Power Consumption - 100W
Cups per Hour - 150
Litres per Hour - Approx. 30 litres per hour

Chilled & Ambient
Chilled, Ambient & Hot

Inquire via from below;
Chilled, Ambient & Sparkling
Chilled, Hot & Sparkling

Silver
Black

Installation - We provide full delivery, install and servicing for the duration of the lease agreement. Taking away the stress.

Full Cooler Servicing - We will schedule a call for 6 months time to book you in for a full servicing to keep it in optimal condition. This service includes a full descale, probe clean and sanitisation.

Classic install kit - If you would like to install yourselves.

Sanitisation Kit - Recommended to be used every 6 months to maintain hygiene, taste & performance.

Micron Carbon Block Filter Cartridge - All cartridges should be replaced every 6 months or every 9500L depending on water hardness and use.

Leak Detection Kit - Prevent any nasty surprises - this shut-off system senses moisture and cuts of water supply until reset. A must have for any areas where the machine will be left un-attended.

Wall Bracket - Useful to anchor your unit to the wall.

Cup Dispenser Blanking Plate For when the integral cup dispenser is not required.

Waste Kit with Sensor - The drip tray only holds 100ml, this kits is essential if you have users who empty bottle into the tray as it holds 10 Litres. The sensor beeps when the tub gets filled to 7 Litres so you can empty.

Rear Cover Kit - Tamper-proof rear cover anchors the appliance to the wall and protects plumbing and electrical connections. Ideal for public areas.

B3.2 How-to Videos